Venstar TSTATEZ - Advanced Setup; Backlight and System Mode Configuration; Heat Pump and Electric Heat Settings

7:00
Am
WAKE
7:00
74
Am
WAKE
COOL
I0:00
Pm
:
SLEEP
I0:00
78
Pm
:
SLEEP
COOL
Press the SET PROGRAM or
MODE/NEXT button to leave setup
and return to normal operation
Press the PROGRAM ON/OFF button to leave
setup and start running the updated program.
Press
Press
Press
Press
MODE/NEXT
MODE/NEXT
MODE/NEXT
SET
PROGRAM
OR
MODE/
NEXT
OR
PROGRAM
ON / OFF
The thermostat must be in the Cool mode to access these setup steps.
Press the Set Program button.
SET
PROGRAM
Programming Cool Schedule
Page 9
74
i2:00
72
Pm
WAKE
HEAT
Adjust the cooling
setpoint for Wake.
Adjust the start time
for Wake.
Adjust the start time
for Sleep.
Adjust the cooling
setpoint for Sleep.
(35 - 99 )
(35 - 99 )
NOTE: If no buttons are pressed the thermostat will leave setup
and return to normal operation after 30 seconds.