Basic Operation
12:00
70
69
Am
:
HEAT
12:00
65
OFF
Am
:
ON
FAN
Selecting Your Desired Temperature
(adjusting the setpoints)
buttons.
Adjust the desired
set temperature with the
HEAT OR COOL MODE
Pressing the UP or DOWN buttons in Heat or Cool mode will
adjust only the heat or cool set temperature.
Using the Fan Button
Press
FAN
Fan On indicates constant fan
operation. You may turn the fan
on even if the thermostat is in the
Off mode. Pressing the FAN button
toggles this feature on or off.
This requires an outdoor sensor (optional accessory) to be installed
(see page 15 for wiring instructions). To read the temperature from
the outdoor sensor, press the OUTDOOR button.
Viewing the Outdoor Temperature
Note: If no sensor is connected two dashes [- -] will appear on the display.
Press
OUTDOOR
OUT
SIDE
Page 7
To Next Page
Loading...
Need help?
General
