Quick Start Set the Clock and Go
Buttons.
To adjust the
Clock or Day use
During Setup &
Programming:
Pressing the UP or DOWN
buttons will modify the flashing
selection.
Press the SET
CLOCK button
Press the SET
CLOCK button
to return to
normal operation.
Am
I2:00
Setup
I
Setting the Clock
RAM
M
SET
CLOCK
RAM M
SET
CLOCK
To adjust the time by
hours press and hold
the FAN button while
pressing the UP or
DOWN buttons.
The thermostat is preprogrammed from the factory to operate
one or two stage equipment* without the need for further
programming. To optimize the installation of this thermostat,
follow the instructions in the Advanced Setup section.
Page 5
* The thermostat is not preprogrammed from the factory to operate
electric heat or heat pump systems. To control these systems,
follow the steps in the Advanced Setup section, pages 10 & 11.
To Next Page
Loading...
Need help?
General
