EasyManua.ls Logo

Ventis MX4 - Certifications and Warranty Information

Ventis MX4
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Ventis™ MX4 Product Manual
49 © 2014 Industrial Scientific Corporation
CERTIFICATIONS
Directive/Code Certification Marking
ATEX Ex ia IIC T4 Ga and Ex ia I Ma;
Equipment Group and Category II 1G and I M1;
IP66; IP67
ANZEx
Ex ia s Zone 0 I/IIC T4; IP66; IP67
China Ex
Ex ia IIC T4 Ga
China CMC Metrology Approval
China MA Approved for Underground Mines; diffusion (without pump) alkaline version
only
CSA Class I, Division 1, Groups A B C D, T4; Ex d ia IIC T4
C22.2 No. 152 for %LEL reading only
GOST – R and GOST - K PBExdiaI X and 1ExdiaIICT4 X
IECEx Ex ia IIC T4 Ga; IP66; IP67
INMETRO Ex ia IIC T4 Ga; IP66; IP67
-20°C Ta +50 °C
KOSHA Ex d ia IIC T4
MED Portable Multigas Detector; Category 2 (MED 2012/32/EU); Li-Ion only
Charger/Docking Station accessories; category 1
MSHA Permissible for Underground Mines; li-ion versions only
SANS-1515 SANS 1515-1
Type A; Ex ia I/IIC T4 IP66/67; Li-Ion only
UL Class I, Division 1, Groups A B C D, T4; Zone 0, AEx ia IIC T4
Class II, Groups F G (Carbonaceous and Grain Dust);
Class I, Zone 0, AEx ia IIC T4
IP66 ; IP67
Marking Requirements
ATEX Markings
Industrial Scientific Corp.
15071 USA
VENTIS MX4
DEMKO 10 ATEX 1006410
Ex ia IIC T4 Ga / Ex ia I Ma IP 66/67
-20
o
C Ta +50
o
C
[Serial Number] [Month/Year of Production]
Charging contact parameters: Um = 6.2V; Ii = 1.3A
EN 60079-29-1; EN 50104
IECEx Markings
Industrial Scientific Corp.
15071 USA
VENTIS MX4
IECEx UL10.0034
Ex ia IIC T4 Ga IP 66/67
-20
o
C Ta +50
o
C
[Serial Number] [Month/Year of Production]
Charging contact parameters: Um = 6.2V; Ii = 1.3A
Diffusion Version:
Warning: Do not recharge or replace battery in hazardous
locations. Replace only with P/N 17148313-1, P/N
17134453-X1, or P/N 17050608
Aspirated Version:
Warning: Do not recharge or replace battery in hazardous
locations. Replace only with P/N 17148313-1 or P/N 17050608
Li-Ion Battery Packs, P/N 17148313-1 or P/N 17134453-X1
Warning: Only charge instrument in non-hazardous
locations. Charging contact parameters: Um = 6.2V; Ii =
1.3A; Do Not Connect in Hazardous Locations
Warning: Read and understand manual before use.
Alkaline Battery Pack, P/N 17150608
Warning: Only replace batteries in non-hazardous locations;
Only approved for use with three (3) AAA battery types Duracell
MN2400 and Energizer EN92. Replace all batteries at the same
time.
Warning: Read and understand manual before use.