Power 7 Technology Corporation – Wi-Fi SD/USB Users Manuals v1.0
5
5. Device Interface
5.1 USB Interface： The built-in Micro USB 2.0 is for data transfer and charging the internal battery
when connected directly into the computer’s USB port or wall chargers.
5.2 USB Host Interface: The built-in USB 2.0 Host Interface for connecting any USB Mass
Storage device and for charging mobile devices such as smartphones, MP3 Players, and tablets.
5.3 SD Slot: Available SD slot to support SD, SDHC, and SDXC. SD adapter is needed to
support Micro SD and Mini SD.
5.4 Power Button: Switch on/off the device.
5.5 Reset Button: Reset the device to the Default Factory Settings.
5.6 LED Panel
Power LED:
LED Off: The device is switched-off or no power
Green Color
Steady Light: Battery is fully charged
Slowly Blinking: Battery charging
Blinking Fast: Device Shutting-Down
Red Color:
Steady Light: Less than 30% available power
Blinking Fast: Will soon shut-down, must be charged immediately
Wi-Fi LED:
Blue Color:
Flashing: Starts the Initialization process
Steady Light: Initialization process completed
Ready to use
Wi-Fi signal is normal
LED Off: The device is switched-off or no power
To Next Page
Loading...