VeriFone e285 Installation Guide

DEVICE SETUP
Connecting to a Computer
E285 INSTALLATION GUIDE 17
D
RAFT
R
EVISION
A.5
Connecting to a
Computer
Connect the e285 device to a PC or laptop to download applications.
1 Insert the USB-C plug into the USB-C port of the e285
2 Connect the other end of the USB-C plug into the host computer’s USB port.
Conducting
Wireless
Transactions
To conduct a wireless transaction:
• Ensure the device is in an optimal position for transmitting.
• Follow the on-screen instructions provided with your application.
Using the Smart
Card Reader
The smart card transaction procedure may vary from one application to another.
Verify the procedure with your application provider before performing a smart card
transaction.
1 Position the smart card with the contacts facing upward (see illustration
below).
2 Insert the card into the reader slot in a smooth, continuous motion until it seats
firmly.
3 Wait for the application to indicate a completed transaction before removing
the card. Premature card removal invalidates the transaction.
Figure 3 Inserting a Smart Card

VeriFone e285 Specifications

General

Operating Temperature	0°C to 50°C (32°F to 122°F)
Connectivity	WiFi, Bluetooth
Battery	Li-ion battery
Card Readers	Magstripe
Processor	400MHz
Contactless	NFC/Contactless
Certifications	PCI PTS 5.x