VeriFone e285 Installation Guide

DEVICE OVERVIEW
Features and Benefits
E285 INSTALLATION GUIDE 9
D
RAFT
R
EVISION
A.5
• EMV L1 and L2
• ISO7816-3, ISO7816-10, and EMV 4.3 standards
Connectivity
USB host/ device port
• Support UART0 software debug (TXD0, RXD0).
• USB2.0 high speed
• Support 5V/200mA for external USB peripherals
• USB host or device is configured by SW
• Type C USB connector at bottom
• Communication port for smart device on charge stand (Android, Windows, or
iDevice)
Bluetooth (wireless communication)
• Bluetooth 4.1 + EDR compliant
• Support Eddystone + iBeacon
• RF transmitter output power Class 1
• RF receiver GFSK typical -90dBm, /4 PSK typical -90dBm, 8DPSK typical -
83dBm
• UART3 interface for SOC communicates to BT
WiFi (wireless communication)
• Support 802.11b/g/n connectivity for communicating with WiFi AP
• Single band support (2.4GHz only, no support for 5GHz)
• BCM43455 module
• SDIO for host interface
3G (wireless communication)
• Gemalto EHS6
• GPRS/GSM Class 10
• UMTS/HSPA DL 7.2Mbps, UL 5.7Mbps
• Host interface USB
• Use RING0 for all wake events (new FW update from Gemalto)

VeriFone e285 Specifications

General

Operating Temperature	0°C to 50°C (32°F to 122°F)
Connectivity	WiFi, Bluetooth
Battery	Li-ion battery
Card Readers	Magstripe
Processor	400MHz
Contactless	NFC/Contactless
Certifications	PCI PTS 5.x