Secure PumpPAY Retrofit Kit Configuration Guide
November 10, 2011 43
3. Select the menu key next to Keypad to run the keypad test. As you press keys on the keypad,
the screen changes to reflect the key presses. Check to make sure the key you press is correctly
displayed on the screen. Press [CANCEL] to return to the screen with the test list.
4. Select the menu key next to Printer to run the printer test.
Key 4
Press any key
“CAN” to return
Changes as you
press keys on
the keypad
Requesting Printer
Status
To Next Page
Loading...
