Secure PumpPAY Retrofit Kit Configuration Guide
54 November 10, 2011
7. To view the upgrade log file, press the key next to OS Upg Log.
8. To perform a full power-cycle reboot of the MX 760, press the menu key next to Reboot.
a. Press any key to perform the reboot.
b. Press [CANCEL] to return to the MENU2 screen.
9. To display the amount of memory available, press the menu key next to Disk Space.
< Quit Logfile More >
IMG file detected (linux-0x3000-mul
Wrote Command:nandwrite -p -s O/dev
.
.
.
.
--END OF LOG--
Press any key
to confirm
Cancel to go back
Type Free(kB)
Flash 4172.0
SRAM 390.0
Press any key