Secure PumpPAY Retrofit Kit Configuration Guide
November 10, 2011 55
Press any key to return to the MENU2 screen.
10. To set the time on the MX 760 to local time, which will then be used in the log file, press the
menu key next to Time. Enter the time and date. Use the [#] key to move past the : and / in the
entry fields. Enter the time in 24-hour format (for example, 4:00 pm would be 16:00:00). After
entering the time, press [ENTER] to move to the date as MM/DD/YY.
Note: The time setting does not automatically adjust for Daylight Savings Time.
When through, press [ENTER] to return to the MENU2 screen.
11. To view the videos (if any are loaded) that will display when the pump is idle or fueling, press
the key next to Video.
Enter time/date
10:15:55
HH:MM:SS (24 Hrs)
10/26/11
MM/DD/YY
Cancel >
< Fuel Idle >
Select Video
To Next Page
Loading...
