VeriFone V200c Installation Guide

V200C AND V400C INSTALLATION GUIDE 33
CHAPTER 3
Specifications
This chapter discusses power requirements, dimensions, and other specifications
of V200c and V400c units. Part numbers use the following conventions:
• V200c M420-xxx-11-xxx
• V200c CTLS M420-xxx-01-xxx
• V200c Plus M420-xxx-04-xxx
• V400c M425-xxx-01-xxx
• V400c Plus M425-xxx-04-xxx
Technical
Specifications
Refer to the following information on the power, weight, temperature, memory,
ports and other technical details about your V200c and V400c terminals.
Unit Power
Requirements
• Input power rating: 11.6 V DC, 1.55 A
• External universal-input 18 W power supply, compliant with Energy Efficiency
Temperature • Operating Environment: 0°C to +50 °C (32 °F to 122 °F)
• Non-Operating Environment:
• V200c: -20 °C to +60°C (- 4 °F to 140 °F)
• V400c: -20 °C to +60°C (- 4 °F to 140 °F)
• Relative humidity: 5% to 90% RH non-condensing
Memory • 128MB DDRAM, 256MB NAND-Flash (V200c and V400c)
• 512MB DDRAM, 512MB NAND-Flash (V200c CTLS and V400c Plus)
Magnetic Stripe
Card
• Triple-track
• Supports bi-directional card read, swipe speed at 10 IPS to 40 IPS
Smart Card Reader • Non-sliding
• Card conserving plated landing contacts
• SC voltage 1.8V, 3.0V, 5.0V
CTLS Function • V200c CTLS, V200c Plus, V400c, and V400c Plus only

VeriFone V200c Specifications

General

Memory	64MB SDRAM
Touchscreen	Capacitive
Connectivity	Ethernet, RS-232, USB
Operating System	Verix
Card Readers	Triple track MSR, EMV smart card reader, Contactless NFC
Power Supply	AC input 100-240V, DC output 5V
Operating Temperature	0°C to 40°C
Certifications	EMV Level 1 and 2, PCI