EasyManuals Logo

Verint Nextiva S1900e Series User Manual

Verint Nextiva S1900e Series
79 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
1: Overview
2 Verint Video Solutions
About the S1900e Series
The S1900e series contains many models covering different video resolution and
functionality needs.
Each device is configured to interface, right out of the box, with the most popular camera
data port configuration (4800 baud, 8 data bits, no parity, 1 stop bit).
Physical Characteristics
The S1900e series devices contains three transmitters and one receiver. Here is an
overview of their features:
Furthermore, all devices have:
One video input (on the transmitters) or output (on the receiver)
12V DC power
A serial port for the RS-422/485 protocol
A reset button
One input dry contact and one relay output
1/8 inch (3.5 mm) stereo jacks
The video analytics capabilities of the S1900e-AS can be used inside a Nextiva IntelliView
solution. In the IntelliView Analytics Rule Builder, the S1900e-AS supports a maximum of
five active rules and six views. For more information, refer to the documentation set of the
Nextiva enterprise video management platform.
You can also purchase each device with the extended temperature option (the
S1900e-AS-XT, S1950e-XT, S1970e-XT, and S1970e-R-XT).
Unless otherwise specified, the word S1900e refers to any of these devices.
Security
Every edge device comes with a unique SSL (Secure Sockets Layer) certificate for securing
its IP link. SSL is a commonly used protocol for managing the security of IP message
transmission. Therefore, the connections with another device, the SConfigurator tool, or a
video management software can be secured.
If enabled, the SSL protocol secures the following data: I/O, serial port, and VSIP (a
proprietary protocol) communication. It does not apply to audio and video transmission.
Once a device is in secure mode, you cannot access it anymore with Telnet, you access its
web interface in secure mode only, and you cannot perform firmware updates through the
IP network on it. However, you can configure it with SConfigurator.
Device Video I/O Performance Onboard analytics
S1900e-AS 1 input 4CIF resolution at 30 frames per second
3
S1950e 1 input 2/3 D1 resolution at 30 frames per second
S1970e 1 input 4CIF resolution at 30 frames per second
S1970e-R 1 output N/A

Other manuals for Verint Nextiva S1900e Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Verint Nextiva S1900e Series and is the answer not in the manual?

Verint Nextiva S1900e Series Specifications

General IconGeneral
BrandVerint
ModelNextiva S1900e Series
CategoryMonitor
LanguageEnglish

Related product manuals