Verint Video Solutions 33
Nextiva S1900e Series User Guide
On-Screen Display
The on-screen display (OSD) is information that you want to present on top of the video
streams, on the analog monitor connected to an S1970e-R receiver.
Depending on the value in the Receiver Mode parameter (see page 27), you have access to
one OSD page (if the mode is Solo) or five OSD pages (if the mode is Quad or Guard Tour)
to customize the OSD information.
Common
The following parameters are those appearing in Solo mode; some will also be displayed in
the other modes:
Decoder Starve—What is displayed on the monitor when the receiver is not receiving
video. This parameter appears only when the receiver is in Solo mode. Possible values
are:
Color bar
Last decoded image
Black
White
Display Logo—To show or hide the Verint logo in the top right corner of the monitor for
30 seconds when the receiver is powering up.
Display Option—Information displayed in the bottom left corner of the monitor. This
parameter appears only when the receiver is in Solo mode. Possible values are:
Nothing
Date/time
Uptime
Display Startup Info—To show or hide the IP address, name of device, and firmware
version in the bottom right corner of the monitor for 30 seconds when the receiver is
powering up.
To Next Page
Loading...
Need help?
General
