3: Using the Web Interface
38 Verint Video Solutions
PTZ Controls
The PTZ controls allow you to manage the movements of the active camera and to specify
zoom values:
The control buttons allow you to pan (left or right) or tilt (up or down) the camera.
The + and - buttons allow you to zoom in or out respectively. You can also determine the
camera pan-tilt speed by entering a number between 1 (slower) and 6 (faster).
You can also use the preset advanced function on automated PTZ cameras.
To send a copy of the video stream to the Windows clipboard, click capture.
Maintaining the Device
You can perform maintenance tasks on the S1970e-R device:
Reboot—To restart the device, while keeping its configuration.
Load—To assign the factory default settings to the device. You may keep some values
by checking the Keep Network Settings box.
Pan/tilt control
Preset
Zoom in/out
Pan/tilt speed
PTZ protocol
To Next Page
Loading...
Need help?
General
