Verint Video Solutions 21
Nextiva S1900e Series User Guide
Serial Port
The device has one serial port, RS-422/485, for communicating with serial equipment (for
example, PTZ cameras). For more information about the serial port settings of the specific
product with which you want to interface, refer to its user guide or contact your product
manufacturer.
The RS-422/485 parameters are:
Bit Rate—The data rate of the target equipment. Possible values range from 1200 bps
to 230,400 bps (for a transmitter) or to 115,200 bps (for a receiver). The required
value is 9600.
Parity—Odd, even, or no parity check. The required value is None.
RS-422/485 Operating Mode—The way the RS-422/485 equipment will interface with
the device. The required value is RS-422 4 Wires.
Stop Bits—The number of stop bits in each transmission. The required value is 1.
Data Bits—The number of bits in transmitted data. The required value is 8.
Access Management
Access management takes care of user accounts and device security.
User Accounts
With user accounts, you can protect the configuration of the device by restricting its access
with a user name and a password. Once the user account mode is activated, you need the
user name/password combination to access the command line interface (CLI) of the device
and the web interface.
Two types of users are available:
Administrator—Has all rights and is automatically available when user accounts are
activated.
Web client—Only has access to live video and quick status in the web interface. Five
web clients are available.
To Next Page
Loading...
Need help?
General
