Verint Video Solutions 7
Nextiva S1900e Series User Guide
c. Connect the electric plug into the outlet.
For any other power supply, refer to the manufacturer documentation for the proper
wiring scheme.
4. Start SConfigurator.
The SConfigurator window appears.
5. In the General tab, click Program Options.
The Program Options window appears.
6. Check Detect All Units on LAN.
7. Ensure that the VSIP Port is 5510; otherwise, click Default.
8. Ensure that the Discovery IP Address is 255.255.255.255; otherwise, click Reset to
Broadcast.
9. Click OK.
10. Select the Units tab, then click Discover.
A device of type “Unknown” with a 169.254.X.Y IP address appears in the list; it
corresponds to your new device.