Compliance
68 Verint Video Solutions
RoHS Declaration of Compliance
June 14th, 2006
Verint believes in the importance of conducting our business in a manner that will help
protect the environment as well as our employees, customers, and the public.
To that end, we are committed to bringing our existing and future product lines into EU
RoHS Directive compliance.
Thus, as of July 1 2006, the following products, S1900e-AS, S1950e, and S1970e, will
comply with the DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE
COUNCIL of 27 January 2003 (RoHS) regarding the restriction of the use of certain
hazardous substances in electrical and electronic equipment.
The S1900e-AS, S1950e, and S1970e products will not exceed the maximum
concentrations of 0.1% by weight in homogenous materials for lead, hex chrome, mercury,
PBB, PBDE, and 0.01% for cadmium. In addition, the S1900e-AS, S1950e, and S1970e
products will qualify for the “lead in servers solders” exemption as set forth in the Directive.
This declaration is provided based on reasonable inquiry of our suppliers and represents our
actual knowledge based on the information provided by our suppliers.
Sincerely,
Willie Kouncar
Vice President, Product Development
Verint Video Solutions
To Next Page
Loading...
Need help?
General
