VERITAS NetBackup 5240 User Manual

Configuring iSCSI
This chapter includes the following topics:
■ Configuring the appliance for iSCSI
■ Setting the IQN for the initiator
■ Viewing the interface properties
■ Configuring the interface properties
■ Removing and resetting the interface properties
■ About CHAP authentication
■ Discovering targets by using the portal address
■ About iSNS
■ Discovering targets by using iSNS
■ Connecting to a target
■ Disconnecting the sessions with a target
■ Viewing the targets
Configuring the appliance for iSCSI
Before configuring your appliance for iSCSI, ensure that the iSCSI targets are
configured in your environment. Check the documentation provided by the target
vendor for more reference.
Table 4-1 provides instructions to configure and set up iSCSI on the appliance.
4
Chapter

VERITAS NetBackup 5240 Specifications

General

Language version	-
License type	Corporate
License quantity	- license(s)
License term in years	5 year(s)