Component Type: Ethernet
Component: PCIe slot 6, port 1 SFP
Status: Unsupported
State: ERROR
Additional information about this error is available at following
link: V-475-500-1000
Best Practices
The following are some recommendations and best practices for iSCSI:
■ Configure an IQN that is different from the default value.
See “Setting the IQN for the initiator” on page 20.
■ Configure alerts so that you can receive iSCSI-related alerts.
See the NetBackup Appliance Administrator's Guide for information about
configuring alerts.
37Troubleshooting iSCSI issues and some best practices
Best Practices
To Next Page
Loading...
Need help?
General
