VERITAS NetBackup Series User Manual

Table 2-3
5240 factory default port configuration
Optimized duplication and
replication
FTMSHBA
configuration
Not applicableNot applicable5240 A
Slot 6, Port 1 - initiator
Slot 6, Port 2 - target
Not applicable5240 B
Slot 6, Port 1 - initiator
Slot 6, Port 2 - target
Not applicable5240 C
Slots 2 and 4, Port 1 - initiator
Slots 2 and 4, Port 2 - target
Slots 5 and 6, Port 1 - target5240 D
Slots 2 and 4, Port 1 - initiator
Slots 2 and 4, Port 2 - target
Slots 5 and 6, Port 1 - target5240 E
Slot 6, Port 1 - initiator
Slot 6, Port 2 - target
Not applicable5240 F
Slot 6, Port 1 - initiator
Slot 6, Port 2 - target
Not applicable5240 G
Not applicableSlots 5 and 6, Port 1 - target5240 H
Not applicableNot applicable5240 J
Slot 4, Port 1 - initiator
Slot 4, Port 2 - target
Slots 5 and 6, Port 1 - target5240 K
Slot 6, Port 1 - initiator
Slot 6, Port 2 - target
Not applicable5240 L
Table 2-4 describes the factory default target port configuration for a 53xx appliance.
Table 2-4
53xx factory default port configuration
Optimized duplication and
replication
FTMSHBA
configuration
Not applicableNot applicable53xx A
Slot 6, Port 1 - initiator
Slot 6, Port 2 - target
Not applicable53xx B
35About the HBA port mode configuration
About FTMS reserved HBA ports and the factory default port mode configuration

VERITAS NetBackup Series Specifications

General

Replication	Yes
Deduplication	Yes
Encryption	Yes
Backup Types	Full, Incremental, Differential
Storage Support	Disk, Tape, Cloud
Compression	Yes
High Availability	Yes
Disaster Recovery	Yes
Operating System	Linux
Vendor	VERITAS
Product	NetBackup
Protocols	NDMP, OST
Cloud Integration	AWS, Azure, Google Cloud
Scalability	Yes
Management Interface	Web-based, CLI
API Support	Yes
Use Case	Enterprise Backup and Recovery