17
Using the Fivespot in USB mode:
1. Ensure VZAccess Manager and activation are complete per “The Basics” section prior to leaving the U.S.
2. Ensure the SIM Card is inserted into the Fivespot.
27ICS
3. Launch VZAccess Manager, if not already running.
4. A message appears to confirm your wireless device. Click Yes. VZAccess Manager now searches for a network (may take a
few minutes).
5. Verify that you are in a suitable coverage area. Click Options tab, select Test WWAN device.
6. Select VZGlobal
ٛ
link in the Wireless Networks window. Double click on this or click Connect. The word Connected
appears at the bottom left of the VZAccess Manager window when a connection is established. If not within coverage, a No
Service message appears. Please ensure you are in a suitable coverage area. For other issues refer to the troubleshooting section of
the VZAccess Manager User Guide.
28 THE BASICS
Using the Fivespot in Wi-Fi mode:
Follow the same instructions as the Connecting your device via Wi-Fi (no USB cable) section.
To Next Page
Loading...
