27
clear what you select or input.
To add a new rule:
a) Select Enable and click Apply in the Basic Settings area.
b) Input the detail information in the Mac/Ip/Port Filtering area.
c) Click Apply in the Mac/Ip/Port Filtering area.
Port Forwarding
Select Firewall→Port Forwarding to access:
If you select Enable, the Virtual Server Settings will appear:
z IP Address: Port: Set IP address and port number for the virtual server.
z Applications: Set which application will be used for the virtual server.
z Dest Port Range: Set destination port range for the virtual server.
z Protocol: Set protocol for the virtual server.
z Comment: Type comment for the virtual server settings.
Select Enable, and input the detail information in the Virtual Server Settings area, and then click Apply to
To Next Page
Loading...
