ADVANCED SETTINGS
5. To remove a specific device’s MAC address, click the
Remove button next to the specific MAC address.
6. When all changes are complete, click Save Changes to save
the changes.
3.3c/ 802.11 MODE
From the 802.11 Mode page, you can limit the wireless access
to your network by selecting the 2.4 GHz and 5 GHz wireless
communication standard (mode) best suited or compatible with the
devices you allow access to your wireless network.
Select the wireless mode as follows:
• Compatibility – This is the default mode setting, providing a
good balance of performance and compatibility with existing
wireless devices. 802.11a,b,g,n,ac and ax devices can connect.
• Legacy – For older wireless devices. Only 802.11a,n and ac
devices can connect. Both 802.11n and 802.11ac are available on
the 5 GHz frequencies. 802.11a (legacy mode) will cause your
wireless network to slow and is not recommended.
• Wi-Fi 5 Mode – This provides maximum performance. 802.11ac
devices will have exclusive use of the 5 GHz frequencies and
802.11n devices will not be able to connect at 5 GHz.
• Wi-Fi 6 Mode – For newer wireless 802.11ax devices only. No
other devices can be used.
• When all changes are complete, click Save Changes to save the
changes.
To Next Page
Loading...