BROADBAND CONNECTION
• Physical Address - displays the physical address of the
network card used for the network.
• MTU - specifies the largest packet size permitted for
– Automatic: sets the MTU (Maximum Transmission
Unit at 1500).
– Automatic by DHCP: sets the MTU according to the
DHCP connection.
– Manual: allows you to manually set the MTU.
• HW Switch Ports - displays the status of each LAN port.
3. Click Apply to save the changes.
./ BROADBAND CONNECTION
ETHERNET/COAX
You can view the properties of your broadband connection (your
connection to the internet). This connection may be via either
Ethernet or Coaxial cable.
To view the connection settings:
1. In the Network Connections page, click the Broadband
Connection (Ethernet/Coax) or Coax link.
To Next Page
Loading...