NETWORK SETTINGS
To view a summary of the services provided by the DHCP server:
1. Select IPv4 Address Distribution in the Network Settings
section.
2. You can edit the DHCP server settings for a device. On the
IPv4 Address Distribution page, click the Edit icon in the
Action column. The DHCP Settings page opens with the
device information displayed.
3. To enable the DHCP server, select DHCP Server in the IPv4
Address Distribution field.
4. Once enabled, the DHCP server provides automatic IP
assignments (IP leases) based on the preset IP range
defined below.
To Next Page
Loading...
Need help?
General