Verizon Wireless G3100 - Guest Wi-Fi Setup

50
 / WIRELESS
SETTINGS
verizonwireless.com | ©2019 Verizon Wireless. All Rights Reserved.
The Fios Home Router is shipped from the factory with Guest
Wi-Fi turned o. The default SSID for Guest Wi-Fi is preconfigured
at the factory to the default wireless network name (SSID) which is
displayed on a sticker located at the rear of the router followed by
hyphen guest (-Guest). For example – if the router is shipped with a
default SSID of “Fios-ABCDE” then the default SSID for Guest Wi-Fi
is “Fios-ABCDE-Guest”.
3.5a/ GUEST WI-FI
To enable Guest Wi-Fi:
1. From the main menu, select Wi-Fi, then select Guest
Network.
2. Click the On radio button and enter a valid SSID and
Password.
3. Press Save Changes to save the changes.
Important: It is not recommended to create a guest network
without a password.