TROUBLESHOOTING TIPS
5.0e/ LAN CONNECTION FAILURE
To troubleshoot a LAN connection failure:
• Verify your Verizon Wi-Fi Extender is properly installed, LAN
connections are correct, and that the Verizon Wi-Fi Extender
and communicating network devices are all powered on.
• Confirm that the computer and Verizon Wi-Fi Extender are both
on the same network segment.
If unsure, let the computer get the IP address automatically by
initiating the DHCP function, then verify the computer is using
an IP address within the default range of 192.168.1.2 through
192.168.1.254. If the computer is not using an IP address within the
correct IP range, it will not connect to your Verizon Wi-Fi Extender.
• Verify the subnet mask address is set to 255.255.255.0.
5.0f/ TIMEOUT ERROR OCCURS WHEN ENTERING THE URL OR
IP ADDRESS
Verify the following:
• All computers are working properly.
• IP settings are correct.
• Verizon Wi-Fi Extender is on and connected properly.
To Next Page
Loading...
