Verizon FiOS - Page 28

COMPUTER NETWORK CONFIGURATION
2.2a/ CONFIGURING DYNAMIC IP ADDRESSING
To configure a computer to use dynamic IP addressing:
WINDOWS 7/8
1. In the Control Panel, locate Network and InternetNetwork and Internet, then
select View Network Status and TasksView Network Status and Tasks.
2. In the View your active networks – Connect or disconnectView your active networks – Connect or disconnect
section, click Local Area ConnectionLocal Area Connection in the Connections Connections
field. The Local Area Connection Status window displays.
3. Click PropertiesProperties. The Local Area Connection Properties
window displays.
4. Select Internet Protocol Version 4 (TCP/IPv4)Internet Protocol Version 4 (TCP/IPv4), then click
PropertiesProperties. The Internet Protocol Version 4 (TCP/IPv4)
Properties window displays.
5. Click the Obtain an IP address automaticallyObtain an IP address automatically radio button.
6. Click the Obtain DNS server address automaticallyObtain DNS server address automatically radio
button, then click OKOK.
7. In the Local Area Connection Properties window, click OKOK
to save the settings.
8. To configure Internet Protocol Version 6 (TCP/IPv6) to use
dynamic IP addressing, repeat steps 1 to 7. However for
step 4, select Internet Protocol Version 6 (TCP/IPv6) Internet Protocol Version 6 (TCP/IPv6) in
the Properties Properties option (refer to IPv6 section for Fios Router
configuration).