115
/ CONFIGURING
ADVANCED SETTINGS
verizon.com/business/products/fios-internet | ©2020 Verizon. All Rights Reserved
./ NETWORK SETTINGS
You can configure the following network settings:
• Network ObjectsNetwork Objects – defines a group, such as a group of
computers.
• Universal Plug and Play (UPnP)Universal Plug and Play (UPnP) – checks the validity of all UPnP
services and rules.
• Port Forwarding RulesPort Forwarding Rules – displays port forwarding rules.
• IPv6IPv6 – enables IPv6 support.
• RoutingRouting – manages the routing and IP address distribution rules.
• IPv4/IPv6 Address DistributionIPv4/IPv6 Address Distribution - adds computers configured as
DHCP clients to the network.
• Port ConfigurationPort Configuration – sets up the Ethernet ports as either full- or
half-duplex ports, at either 10 Mbps, 100 Mbps, or 1000 Mbps.
• Zenreach AP ServiceZenreach AP Service – provides a quick access to your
Zenreach AP service.
8.2a/ NETWORK OBJECTS
Network objects define a group, such as a group of computers, on
your Fios Router network by MAC address, IP address, and/or host
name. The defined group becomes a network object. You can apply
settings, such as configuring system rules, to all devices defined in
the network object.
To Next Page
Loading...
