NETWORK SETTINGS
For example, instead of setting the same website filtering
configuration individually to five computers one at a time, you can
define the computers as a network object. Website filtering can
then be simultaneously applied to all the computers.
You can use network objects to apply security rules based on host
names, instead of IP addresses. This is useful since IP addresses
change from time to time. In addition, you can define network
objects according to MAC address to make the rule application
more persistent against network configuration settings.
To define a network object:
1. 1. Select Network ObjectsNetwork Objects in the Network SettingsNetwork Settings section.
2. To define a network object, click AddAdd. The Edit Network Edit Network
ObjectsObjects page displays.
To Next Page
Loading...
