ADVANCED SETTINGS
3.3c/ 802.11 MODE
From the 802.11 Mode page, you can limit the Wi-Fi access to your
network by selecting the 2.4 GHz and 5 GHz Wi-Fi communication
standard (mode) best suited or compatible with the devices you
allow access to your Wi-Fi network.
Select the Wi-Fi mode as follows:
• Compatibility – This is the default mode setting on 5 GHz,
providing a good balance of performance and interoperability
with existing Wi-Fi devices. 802.11a,n,ac and ax devices can
connect.
• Legacy – This is the default mode setting on 2.4 GHz, providing
broad connection support for old and new Wi-Fi devices. Only
802.11b,g and n devices can connect.
• 802.11n is available on both 2.4 GHz and 5 GHz frequencies.
• Connecting 802.11a or b devices will cause your Wi-Fi network
to slow on that radio and is not recommended.
• When all changes are complete, click Save ChangesSave Changes to save the
changes.
To Next Page
Loading...
