GUEST NETWORK
3.5a/ GUEST WI-FI
To enable Guest Wi-Fi:
1. From the main menu, select Wi-FiWi-Fi, then select Guest Guest
NetworkNetwork.
2. Click the OnOn radio button and enter a valid SSIDSSID and
PasswordPassword.
3. Press Save ChangesSave Changes to save the changes.
Important: It is not recommended to create a guest network
without a password.
3.5b/ GUEST WIFI DEVICES
The devices on the Guest NetworkGuest Network can be viewed on the Guest Guest
Wi-Fi device listWi-Fi device list. If the admin toggles the button next to a device to
OO, that device will be blocked from accessing the internet.
Refer to “Connecting A Wi-Fi Device Using WPS” on page 31
for the Wi-Fi Protected Setup (WPS) setup.
To Next Page
Loading...
