EasyManua.ls Logo

Verizon FiOS - Page 63

Verizon FiOS
185 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NETWORK HOME/OFFICE CONNECTION
GENERAL
In the GeneralGeneral section, verify the following information:
StatusStatus - displays the connection status of the network.
NetworkNetwork – displays the type of network connection.
Connection TypeConnection Type - displays the type of connection
interface.
Physical AddressPhysical Address - displays the physical address of the
network card used for the network.
MTUMTU - displays the Maximum Transmission Unit (MTU)
indicating the largest packet size permitted for internet
transmissions:
AutomaticAutomatic: sets the MTU (Maximum Transmission
Unit) at 1500.
Automatic by DHCPAutomatic by DHCP: sets the MTU according to the
DHCP connection.
ManualManual: allows you to manually set the MTU.
Internet ProtocolInternet Protocol
In the Internet Protocol section, specify one of the
following:
No IPv4 AddressNo IPv4 Address: the connection has no IP address.
This is useful if the connection operates under a
bridge.
Obtain an IPv4 Address AutomaticallyObtain an IPv4 Address Automatically: the network
connection is required by Verizon to obtain an IP
address automatically. The server assigning the IP

Other manuals for Verizon FiOS

Related product manuals