Verizon MiFi 4510L - Internet Connection Status; WWAN Configuration

35
Internet Connection
The Internet Connection section shows device settings and status.
• Status — The status of the Internet connection, usually Connected or Disconnected.
• Technology — The type of technology used to connect to the Internet.
• Received — The amount of data received from the network.
• Transmitted — The amount of data sent to the network.
• Connected Time — How long the device has been connected to the network.
• IP Address — The Internet Protocol (IP) address that identies this device on the network.
• Mask — The mask is a standard address that covers the MiFi device’s network behind the
larger Internet.
• Gateway — The address of the server used to access the Internet.
• DNS — The address of the Domain Name Server (DNS).
WWAN Settings
To congure the settings, follow these steps.
➊ Select the Auto-connect check box to automatically connect to the Internet when the device is
turned on.
NOTE The APN is the Access Point Name the device uses to connect to the Internet. This is automatically
provided by Verizon.
➋ Set the WWAN Preferred Mode to the type of technology you want to use to connect to the
Internet.
Buttons
• Connect — Click this button to connect to the Internet.
• Disconnect — Click this button to disconnect from the Internet.