Verizon MiFi 4510L - Port Range Configuration

45
Port Ranges
You can dene up to ve port ranges for each application. Each port range has the following
options.
• Start Port — Type the beginning of the range of port numbers used by outgoing trac
for this application. Use as many rows as necessary to dene the required number of port
ranges. Unused rows can be left blank.
• End Port — Type the end of the range of port numbers. If the port is a single port instead of a
range, type the same value for both the Start Port and the End Port.
• Protocol — For each port range (each row), select the protocol (TCP, UDP, or both) used by
that port range.
You can dene all of your applications before you click Apply to save your changes.
Use the Ports and Hide links as necessary to open and close the Port Denition Panel so you can
dene the ports for each application as needed.
Buttons
• Apply — Click this button to save changes made to the applications and/or port ranges.
• Revert — Click this button to discard changes made to the applications and/or port ranges.