18
To change your connection preference:
➊ Select one of the following options:
• Auto-connect - Automatically connect to the network when you insert the USB730L into
your modem.
• Auto-connect if not roaming - Automatically connect to the network when you insert the
modem into your modem only if it is not roaming.
• Manual Connection - Manually connect to the network when you insert the modem into
your modem. To manually connect to the network, you must use the Connect/Disconnect
button on the modem Web User Interface.
➋ Click Confirm on the Conrm warning pop-up window.
NOTE All internet connections will be immediately terminated when you click Confirm.
➌ Click Save Changes to accept and nalize the new Connection Preference settings.
To change your preferred network technology:
➊ Select the desired network technology from the dropdown menu. Choose from Global, LTE/
CDMA, and LTE/GSM/UMTS.
➋ Click Save Changes to accept and nalize the revised preferred network setting.
The modem automatically selects the best network to use when using Global. To manually select
another network:
➊ Click Select Network
➋ Click Scan for Networks when the Manual Network Selection page appears.
➌ Click Confirm on the Conrm warning pop-up window.
NOTE Any existing network connections will be terminated when you click Confirm after the network
scanning process completes.
➍ When the Available Networks display, click Select to make your manual network selection.
To display or change the Networks Advanced Settings:
➊ Click Show Advanced Settings. The 4G LTE APN displays the pre-congured APN and should
not be changed unless you have a corporate account with your own APN.
➋ If you are using a non-Verizon SIM, enter the APN in the LTE/GSM/UMTS APN eld.
➌ Click Save Changes to accept and nalize all settings.
To Next Page
Loading...
Need help?
General
