User Manual MicroDispensing Systems MDS 3010A-FD and MDS 3020A-FD
User Manual MicroDispensingSystems MDS 3010A-FD and MDS 3020A-FD
VTK-TS-MA-032 Revision D 1
1. Introduction
1.1. General Information
By buying a Vermes Microdispensing System of the MDS 3000 family you receive a high-quality system
manufactured with greatest care.
In this manual you will in general become acquainted with Vermes Microdispensing services and in detail
with the use of your system. We will show you how easy and simple the start-up and use of your
Microdispensing System is.
We kindly ask you to take a close look at this manual before you start operating your system. If there are
any questions about the use of the Microdispensing System after having read the manual, please get in
touch with our customer service.
Vermes Microdispensing
You can reach us all year round from Monday to Friday 9 a.m. to 5 p.m.
Tel: +49 8024 644-0/26
Fax: +49 8024 644-19
support@vermes.com
www.vermes.de
Or at all our agencies and partners abroad.
1.2. Areas of applications
Dispensing
Typical examples of high quality and highly dynamic dispensing requirements appear in the area of
pharmaceutics, medicine, and biotechnology. So far, only low viscous media could be dispensed due to the
nozzle and valve technologies being mainly made for the intake and output of analysis fluids in micro-titter
plates.
Micro adhesion
The wide field of adhesives, which has become increasingly significant, especially during the past years,
experiences an additional dynamic by the enlargement in the direction of micro-adhesion. As there have
been only time-consuming contact techniques, delivering smallest adhesive drops, the micro dispensing of
adhesive products is accelerated by the elimination of feed motion in z-direction in terms of high
multiplication.
Micro lubrication
In the fine mechanics appliance area, components and devices – for example mechanical clocks or small
gears of hard drives – the exact dispensing of lubricants in micro dispensing techniques represents a
considerable progress to accelerate the production process. In such cases, we talk about micro lubricating.
Micro marking
In the area of marking technologies in industrial processes, the Microdispensing System MDS 3000 family
is the ideal addition to automated marking within individual processes. The marks are applied contactless
with high speed and precision to parts, which are often extremely small-sized.
To Next Page
Loading...