Vermes MDS 3010A-FD - Page 52

User Manual MicroDispensing Systems MDS 3010A-FD and MDS 3020A-FD
User Manual MicroDispensingSystems MDS 3010A-FD and MDS 3020A-FD
VTK-TS-MA-032 Revision D 49
Figure 18: Exploded view of valve and tappet
guard
Figure 19: Front view of valve and tappet guard
The alignment of the tappet guard is achieved by the centering piece. For mounting a hexagon socket head
cap screw (DIN 912) with the properties M2.5 x 20 is used.
Figure 20: Centering of the tappet guard via the centering piece
Figure 21: Axis of the screw M2.5 x 20