GENERAL INFORMATION
1-2
VersaPulse Select Service Manual
0621-499-01 12/95
®
®
U1
2
3
1
U1
6
5
7
1.3 SERIAL NUMBERS
Serial numbers for the Versapulse Select are in the format,
MYPHWVXXXX
where M is the month produced
(a is January, b is February, etc..)
Y is the last digit of the year produced
(4 is 1994., etc..)
P is a number indicating maximum system power
(6=60w, 4=45w, 3=30w)
H is the number of laser heads installed (1, 2, 3, or 4)
W is a number indicating the mix of rods installed
(See Below)
V is a number indicating power supply configuration
(1= 208VAC single phase)
XXXX is the number of the laser built
(0001, 0002, etc..)
W: 1= Holmium only
2= Erbium only
3= Nd:Yag only
5= Nd/Ho combo
To Next Page
Loading...