Vertiv Liebert - Default Chapter; Table of Contents

TABLE OF CONTENTS
1 Important Safety Instructions 1
2 Mechanical Installation 3
2.1 Pre-Installation Planning 3
2.2 Preliminary Checks 3
2.3 Environmental Considerations 3
2.3.1 Battery Room 3
2.3.2 Storing the UPS and Batteries for Delayed Installation 4
2.4 Positioning 4
2.4.1 Moving the Cabinets 4
2.4.2 Clearances 4
2.4.3 Raised-Floor Installations 5
2.4.4 Removing Shipping Bolts 5
2.5 System Configuration 6
2.6 Installing a Junction Cabinet 8
3 Electrical Installation 11
3.1 Grounding Configuration for Battery Systems 11
3.2 Connecting EquipmentGroundCablesandStraps 11
3.3 Interconnecting Battery Cables inaTop-Terminal Cabinet 12
3.4 Interconnecting Battery Cables inaFront-terminalCabinet 13
3.5 Connecting DC Input Power 15
3.6 Control Cabling 19
3.6.1 Connecting to Liebert EXL S1 20
3.6.2 Connecting to Liebert EXL 21
3.6.3 Connecting to Liebert NX 22
3.6.4 Connecting to Liebert NXL 24
3.6.5 Connecting a Vertiv™ Battery Monitoring System 25
3.6.6 Connecting an External Room Temperature Sensor 28
4 Specifications 29
i