Need help?Do you have a question about the Vertiv Liebert EXS and is the answer not in the manual?
General| Product Type | Uninterruptible Power Supply (UPS) |
|---|---|
| Topology | Double Conversion Online |
| Frequency | 50/60 Hz |
| Input Voltage | 208/220/230/240 VAC |
| Output Voltage | 208/220/230/240 VAC |
| Efficiency | Up to 96% |
| Battery Type | Sealed Lead Acid (SLA) |
| Communication | RS-232, USB |
| Operating Temperature | 0°C to 40°C |
| Dimensions | Varies by model |
| Weight | Varies by model |
General safety precautions for product storage and operating environment.
Explains safety symbols and critical precautions for UPS operation.
Explains UPS operation when utility power is lost and running on batteries.
Details UPS operation when power is supplied directly from the bypass source.
Describes the mode used for safe servicing of UPS internal components.
Describes the UPS behavior and indicators during a fault condition.
Covers environmental requirements, clearances, and protective devices before installation.
Details the necessary space around the UPS for proper operation and servicing.
Instructions and safety warnings for handling and unpacking the UPS unit.
Step-by-step guide for safely removing the UPS from its shipping pallet.
Instructions for connecting the power cables to the UPS.
Instructions for connecting the Remote Emergency Power Off (REPO) feature.
How to adjust display and operating parameters via the LCD.
Step-by-step guide for safely starting up the UPS.
Steps to engage maintenance bypass mode for servicing.
Pre-startup checks and warnings for parallel UPS systems.
Step-by-step guide for powering on a parallel UPS system.
Procedures for using maintenance bypass in multi-UPS parallel systems.
Steps to safely isolate a single UPS module from a parallel system for repair.
Procedures to reintegrate a previously isolated UPS module back into the system.
Steps for a complete shutdown of the UPS system.
Crucial safety precautions when working with UPS batteries.
Details the various alarm, fault, and warning messages and their actions.
To Next Page
