Vertiv Liebert EXS - Transferring from Normal (Inverter) to Bypass Mode

Main menu
To access the main menu, press Enter while at the UPS Mimic screen. Use the up/down buttons to select the submenu
options, and press Enter to open the submenu. Press ESC to return to UPSMimic.
Figure 4.5 Main Menu
Submenu Description
Status Voltage, current, frequency, and parameters for UPS components. See Status screen below.
Settings Display and system parameter settings. See Settings submenu on the facing page.
Control UPS controls. See Control screen on page36.
Log Current alarms and event history. See Log screen on page36.
About Product and network information. See About page on page37.
Maintain Service only, proprietary password protected page for use only by Vertiv service representatives.
Table 4.4 Menu Options
Status screen
The status screen displays voltages, currents, frequencies, and parameters on individual tabs for input, bypass, battery,
output, and load status.
To view the UPS status information:
1. At the main menu, select the status icon, and press Enter.
2. Use the arrow buttons to move the cursor left/right and select a tab, then press Enter to display the status
information for the selected tab.
34 Proprietary and Confidential ©2023 Vertiv Group Corp. 4 Operation and Display Panel
Vertiv™ Liebert® EXS Installer/User Guide