FIELD DESCRIPTION
Device Name Unique name for the LP6000 controller. 30-character limit.
Device ID Device IDnumber for the LP6000. 30-character limit. 0 (zero) = disabled.
Description Description of the LP6000 device. 30-character limit.
UDP Port
Specifies UDP port used by the application. Enter 0 (zero) to specify port 47808 (0xBAC0) as the UPD port. If
your application specifies a different port, enter that value here.
Default: 0
MS/TP Max Master
Sets the slave address. Valid values: 1 to 127. 0 (zero) = slave-only.
Default: 0
Table 6.11 LCD BACnet Setup fields
4.6.10 Clearing Alarm History and Trend Logs on the Touchscreen
1. On the LCD display, touch Setup, enter a password if needed, and touch the enter key.
The Setup menu opens.
2. Touch Up/Down to highlight Clear History, and touch Select.
3. Use the Up/Down buttons to highlight Yes, and touch Select.
The alarm history and trend logs are cleared.
Vertiv | Liqui-tect LP6000 Installer/User Guide | 33