Vertiv Liqui-tect LP6000 User Manual

1.2 Distance-read Leak Detection
When the Liqui-tect LP6000 measures a current in excess of the defined leak threshold, the
microprocessor computes the distance to the leak, annunciates the leak, and logs the alarm in the event
log. The leak is communicated via the front-panel display and other configured notification methods.
1.3 Communication with Liqui-tect LP6000
The front-panel display is an LCDtouch screen with virtual buttons providing access to all functions of a
stand-alone unit.
A Web-based user interface (UI) provides access to system conditions and settings on-site or via network
communication.
In additon to the web-based UI, LP6000 communicates with external monitoring systems via the following
outputs:
• Modbus via EIA-485, twisted-pair wire, or TCP/IP
• BACnet/IP or BACnet/MSTP
• SNMP
• SMTP
Vertiv | Liqui-tect LP6000 Installer/User Guide | 8

Vertiv Liqui-tect LP6000 Specifications

General

Brand	Vertiv
Model	Liqui-tect LP6000
Category	Controller
Language	English