DGT / DGT60 / DGTQ / DGTP
59
It is possible to select for each letter one of the following fonts:
PARAMETER TYPE OF FONT
(WIDTH X HEIGHT)
Font. 1 1 x 1,5 mm
Font. 1d 1 x 3 mm
Font. 2 1,5 x 2,5 mm
Font. 2d 1,5 x 5 mm
Font. 3 2 x 3 mm
Font. 3d 2 x 6 mm
Font. 4 3 x 4 mm
Font. 4d 3 x 8 mm
Font. 5 4 x 6 mm
Font. 5d 4 x 12 mm
EXAMPLE 1: one wants to print 4 heading lines, of which the first two are double the height in respect to the second
two, GROSS, TARE, NET, DATE and TIME.
One will programme:
in the heading, LinE 1 and LinE 2 = ChAr 2
LinE 3 and LinE 4 = ChAr 1
ChAr.t = ChAr 1
ChAr 1 = Font. 3
ChAr 2 = Font. 3d
Result:
t.MarG: DISTANCE OF THE DATA PRINTED FROM THE LABEL’S UPPER MARGIN
Enter a value with 3 digits, expressed in mm
(!) 10
L.MArG: DISTANCE OF THE DATA PRINTED FROM THE LABEL’S LEFT MARGIN
Enter a value with 3 digits, expressed in mm
(!) 4
DIMENSION = ChAr 2
DIMENSION = ChAr 1
DIMENSION = ChAr 1
To Next Page
Loading...