15
3
Fuel
Ensure that the fuel tank is filled with
diesel fuel.
Use only clean, water-free, commercial
approved diesel fuel.
For fuel grade see page 66.
Bleed the fuel system, see page 26.
Other preparations
• Check battery and cable connections.
• Start the engine, see page 16, and let it
run for about 10 minutes without load.
Check the engine and all connections
(fuel, cooling water and exhaust) for
leaks.
Running-in
In order to ensure a long life for your
engine, please observe the following for
the first 50 operating hours:
• Allow the engine to reach operating
temperature before applying a load.
• Avoid fast acceleration.
• Do not allow the engine to run faster
than 3/4 of maximum RPM.
First commissioning
Running-in
Use
FUEL
VD00002
Never fill the fuel tank while
the engine is running. Do
not spill fuel. Prevent
unnecessary pollution.
To Next Page
Loading...
