33
5
VD01034
Draining the oil
Drain the oil with the aid of a separate
sump pump.
Remove the dipstick (ZF-Hurth,
17)
or
remove the dipstick (Technodrive,
27)
.
Insert the suction hose of the sump pump
in the dipstick hole. Push down the pump
handle quickly and pull it up slowly.
Remove the sump pump when all the old
oil has been pumped out.
Or, if sufficient space below the gearbox is
available, oil can be drained by removing
the drain plug.
Drain plug: ZF-Hurth
17
Technodrive
14
Collect the oil in a dripping pan.
Filling with new oil
Refill the gearbox to the correct level via
the dipstick opening (ZF-Hurth, 17) or
via the filling hole (Technodrive,
27)
.
For oil specification see page 65.
In case your engine is equipped with
another brand of gearbox follow the
instructions given in the supplied owners
manual for changing oil and other care
and maintenance.
Changing the gearbox oil
Every 500 operating hours.
Maintenance
VD01043 VD01042
To Next Page
Loading...
