password after the input is correct. When the valid
times verification function is turned off, the system no
longer limits the number of uses.
4. "Valid times": the number of welding times the
machine can use.
5. When "Validity Verification" and "Validity Times" are
enabled at the same time, "Validity Verification" is used
as the default verification method. When "Validity
Verification" and "Validity Times" are turned off at the
same time, the use rights of the machine are no longer
restricted.
6. "Set system time": Through this option, you can set
the system time of the fusion splicer. Use the left and
right buttons to adjust the time field; use the up and
down buttons to adjust the time, and press and hold the
up and down buttons continuously for quick adjustment.
Press the menu key to save the time.
7. "Set power-on password": Through this option, you
can set the login password for the fusion splicer. Press
the up, down, left, and right keys to adjust the character
to be input; press the menu key to use the selected
character as the current input. Press the reset key to
cancel the current input password; press the start key
to save the current input password and prompt that the
setting is successful. Press and hold the key
continuously for quick adjustments.
8. "Power-on password verification": When this function
is enabled, the user will be required to enter a
password every time the device is turned on. If
password authentication is not required for booting, this
function can be turned off.
9. "Set Admin Password": Through this option, you can
set the admin password. Press the up, down, left, and
To Next Page
Loading...
