jects in the equipment to prevent the laser from being reflected on the
human body or flammable objects.
During the operation of the equipment, the operator must always
observe the operation of the equipment. If an abnormal situation occurs,
please immediately.
The equipment should be in a dry, pollution-free, vibration-free and strong
electromagnetic interference environment, with a working temperature of
5-40 degrees Celsius and a humidity of 5-95%(non condensing water
environment).
The equipment should always be far away from electrical equipment
sensitive to electromagnetic interference, otherwise it may cause
electromagnetic interference.
The working voltage of the device is: European AC220V or North
American AC120V (please confirm the working voltage of the device
before use).
The most important carbon dioxide glass laser in the equipment is a
consumable and a vulnerable item. Please take care of it during use The
carbon dioxide glass laser needs pure cold water to cool down Please
pay attention to the water temperature not to exceed 30 degrees Celsius
during use, otherwise the laser will be damaged. When the am-bient
temperature is about to drop below 0 degrees Celsius, please re-place it
with an antifreeze liquid to avoid damage to the carbon dioxide glass
laser.
It is forbidden to turn on the equipment when the grid voltage is unstable
or mismatched. The manufacturer and seller are not responsible for any
loss caused by incorrect use or non-compliance with the above
regulations.
To Next Page
Loading...
