The machine is suitable for engraving logos and other consumer
products on applicable substrates. This laser can process a variety of
materials, including wood and cork, paper and cardboard, most plastics,
glass, cloth and leather, and stone. It can also be used with some
specially coated metals. Use of this system for purposes or materials
other than those for which it is specified is not permitted.
The system must be operated, maintained, and repaired by a person who
is familiar with the field of use and hazards of the machine and engraving
materials, including its reflectivity, electrical conductivity, potential for the
production of harmful or combustible fumes, etc.
Laser beams are dangerous. The manufacturer and/or seller shall not be
liable for any improper use of this device or for any damage or injury
resulting from use. It is the operator's obligation to use this cabinet laser
engraver only in ac-cordance with its intended use, other instructions in
the manual, and all applicable local and national laws and regula-tions.
To Next Page
Loading...
